1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
- mustang1989
- Moderator
- Posts: 5035
- Joined: Tue Mar 18, 2014 8:35 pm
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
Nice job on feathering those paint demarcation lines Kent.
-
kahunaminor
- Advanced Member
- Posts: 375
- Joined: Thu Jul 07, 2016 4:53 am
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
Welcome back,
The exhaust markings and fuselage stripe have been completed. Not without a couple of touch ups but I am now happy with what I have:




Now the basic colours are on, the whole lot has been given a lacquer gloss coat in preparation for decals and weathering:


The underside isn't too bad. The wing root gun ejections have had some gizmology added and painted gun metal:


MLG components awaiting final assembly and flat coat:

That's all for now, thanks for looking.
Regards,
The exhaust markings and fuselage stripe have been completed. Not without a couple of touch ups but I am now happy with what I have:




Now the basic colours are on, the whole lot has been given a lacquer gloss coat in preparation for decals and weathering:


The underside isn't too bad. The wing root gun ejections have had some gizmology added and painted gun metal:


MLG components awaiting final assembly and flat coat:

That's all for now, thanks for looking.
Regards,
Kent in Oz
- Medicman71
- Elite Member
- Posts: 11316
- Joined: Mon Apr 07, 2014 9:32 am
- Location: Houston, Tx
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
It's really coming along!! Nice work!!

Mike
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
-
kahunaminor
- Advanced Member
- Posts: 375
- Joined: Thu Jul 07, 2016 4:53 am
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
Welcome back,
I am happy with the effort so far and haven't really found any real problems (well none that I will tell bout because they came about through laziness!). The decals went on and being Cartograf, performed beutifully. I did all the stencils first then the individual markings. The only real drama I had was one of the wing upper crosses needed to be re positioned and through ham fisted handling, I botched it up. Considered masking and spraying but it was late at night, so I just reached into the trusty stash for one of the other Eduard 190 kits and replaced the decal:








It was then time to get some guns. The Master barrel set has been blackened in Uschi blackening agent and went in without too much issue, one of the wing root forward barrels required some manhandling and consequent touch up but we now have guns:



Next up is more weathering and the final run to the wire.
Regards,
I am happy with the effort so far and haven't really found any real problems (well none that I will tell bout because they came about through laziness!). The decals went on and being Cartograf, performed beutifully. I did all the stencils first then the individual markings. The only real drama I had was one of the wing upper crosses needed to be re positioned and through ham fisted handling, I botched it up. Considered masking and spraying but it was late at night, so I just reached into the trusty stash for one of the other Eduard 190 kits and replaced the decal:








It was then time to get some guns. The Master barrel set has been blackened in Uschi blackening agent and went in without too much issue, one of the wing root forward barrels required some manhandling and consequent touch up but we now have guns:



Next up is more weathering and the final run to the wire.
Regards,
Last edited by kahunaminor on Tue Sep 13, 2016 4:08 am, edited 1 time in total.
Kent in Oz
- mustang1989
- Moderator
- Posts: 5035
- Joined: Tue Mar 18, 2014 8:35 pm
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
You've got yourself one fine lookin paint job so far Kent!
-
kahunaminor
- Advanced Member
- Posts: 375
- Joined: Thu Jul 07, 2016 4:53 am
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
Welcome back,
I am heading towards the finish line. Decals are on, Flory wash on, final matte coat on and masking removed from the glazing. The canopy is not glued but set in place to see how it will look. The gun camera opening has had some Micro Krystal Kleer added to simulate a lens. Enough talk here are the photos:










Regards,
I am heading towards the finish line. Decals are on, Flory wash on, final matte coat on and masking removed from the glazing. The canopy is not glued but set in place to see how it will look. The gun camera opening has had some Micro Krystal Kleer added to simulate a lens. Enough talk here are the photos:










Regards,
Kent in Oz
- mustang1989
- Moderator
- Posts: 5035
- Joined: Tue Mar 18, 2014 8:35 pm
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
This is gonna be one helluva nice lookin' 190 when you're done is all I've gotta say. 
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
- Kari
---
On the bench:
MiniArt 1:48 - Junkers F13 Float Plane
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
MiniArt 1:48 - Junkers F13 Float Plane
https://www.facebook.com/GrundAsk-Scale ... 721218708/
-
kahunaminor
- Advanced Member
- Posts: 375
- Joined: Thu Jul 07, 2016 4:53 am
Re: 1/48 Eduard Fw 190A-5, Hptm. Egon Mayer, France 1943
Thanks for the comments guys.
Regards,
Regards,
Kent in Oz
